Fluke PM6681R, PM6685R MEASureMEMoryN?, MEASureMEMory?, Memory Recall, Measure and Fetch Result

:MEASure:MEMory<N>?

Memory Recall, Measure and Fetch Result

Use this command when you want to measure several parameters fast.

PM6681

:MEAS:MEM1? recalls the contents of memory 1 and reads out the result, :MEAS:MEM2? recalls the contents of memory two and reads out the result etc.

The equivalent command sequence is *RCL1;READ?

The allowed range for <N> is 1 to 9. Use the somewhat slower :MEAS:MEMory? N command described below if you must use memories 10 to 19.

	TIMING
	Data Format
Command	ASCii	REAL
:MEAS:MEM1?	7.9 ms	6.7 ms
:MEAS:MEM? 1	9.1 ms	8.0 ms
*RCL 1;READ?	10.1 ms	8.9 ms
Returned format:
<measurement result>￿
Complies to standards:	SCPI 1991.0, confirmed

:MEASure:MEMory?

￿<N>

Memory Recall, Measure and Fetch Result

PM6681

Same as above command but somewhat slower. Allows use of all memories (1 to 19).

Example: :MEAS:MEM ￿ 13

This example recalls the instrument setting in memory number 13, makes a meas- urement, and fetches the result.

Complies to standards: SCPI 1991.0, confirmed

9-58 Command Reference