Fluke PM6685 Error Code 1100 to -1139, CNT-8X Device specific errors leading 1 only for PM6681

		Error Messages
	CNT-8X Device specific errors (leading 1 only for PM6681)
Error	Error Description	description/explanation/examples
Number
(1)100	Device operation	A floating-point error occurred during a counter op-
	gave floating-point	eration.
	underflow
(1)101	Device operation	A floating-point error occurred during a counter op-
	gave floating-point	eration.
	overflow
(1)102	Device operation	A floating-point error occurred during a counter op-
	gave ‘not a number’	eration.
(1)110	Invalid measure-	The counter was requested to set a measurement
	ment function	function it could not make.
(1)120	Save/recall memory	An attempt was made to write in a protected mem-
	protected	ory.
(1)130	Unsupported com-	Indicates a mismatch between bus and counter ca-
	mand	pabilities.
(1)131	Unsupported
	boolean command
(1)132	Unsupported deci-
	mal command
(1)133	Unsupported enu-
	merated command
(1)134	Unsupported auto
	command
(1)135	Unsupported single
	shot command
(1)136	Command queue	The counter has an internal command queue with
	full; last command	room for about 100 commands. A large number of
	discarded	commands arrived fast without any intervening
		query.
(1)137	Inappropriate suffix	A suffix unit was not appropriate for the command.
	unit	Recognized units are Hz (Hertz), s (seconds), Ohm
		(Ω) and V (Volt).
(1)138	Unexpected com-	A command reached counter execution which
	mand to device exe-	should have been handled by the bus.
	cution
(1)139	Unexpected query	A query reached counter execution which should
	to device execution	have been handled by the bus.

Error Code (1)100 to -(1)139 8-13