Fluke PM6685R Reset, This command removes an individual MACRo PM6680B/81/85, Default settings on

∗RMC

￿‘<Macro name>’

Delete one Macro

This command removes an individual MACRo.

PM6680B/81/85

Parameters:

‘<Macro name>’ is the name of the macro you want to delete.

See￿also: <Macro name> is String data that must be surrounded by quotation marks.

*PMC, if you want to delete all macros.

*RST

Reset

PM6680B/81/85

The Reset command resets the counter. It is the third level of reset in a 3-level re- set strategy, and it primarily affects the counter functions, not the IEEE 488 bus.

The counter settings will be set to the default settings listed on page -. All previous commands are discarded, macros are disabled, and the counter is prepared to start new operations.

Example: *RST

See also:

Default settings on page -.

Complies to standards: IEEE 488.2 1987.

9-128 Command Reference