Fluke PM6681R, PM6685R manual READARRay?, Read an array of results, Command Reference

PM6680B/81/85

:READ:ARRay?

￿«<array size for FETCh>MAX»

Read an array of results

The :READ:ARRay? query differs from the :READ? query by reading out several results at once after making the number of measurements previously set up by :CONFigure:ARRay ￿ or ￿ :MEASure:ARRAy?.

The :READ:ARRay? query is identical to: :ABORt;:INITiate;:FETCh:ARRay?_<array size for FETCh>

￿The <array size for FETCh> does not tell :READ to make that many measure- ments, only to fetch that many results. :CONF:ARR, ￿ :MEAS:ARR, :ARM:LAY1:COUN or :TRIG:LAY1:COUN sets the number of measurements.

Parameters:

<array size for FETCh> sets the number of measuring results in the array. This size must be equal or less than the number of measurements specified with :CONFigure.

MAX means that all the results in the output buffer will be fetched.

Returned format: <data>[,<data>]￿

The format of the returned data is determined by the format commands :FORMat and :FORMat:FIXed.

SEND￿ :ARM:COUN ￿ 10;:READ:ARR? ￿ 5

This example configures the counter to make an array of 10 standard measure- ments. The counter is triggered and data from the first five measurements are read out with the :READ? query.

Type of command: Aborts all previous measurement commands if *WAI is not used.

Complies to standards: SCPI 1991.0, confirmed.

Command Reference 9-83