Fluke PM6681R, PM6685R manual Purge Macros, Power-on Status Clear, Removes all macro definitions

*PMC

Purge Macros

Removes all macro definitions.

Example: *PMC

See also:

PM6680B/81/85

:MEMory:DELete:MACRo ￿ ‘<Macro-name>’ if you want to remove a single macro.

Complies to standards: IEEE 488.2 1987.

*PSC

￿<Decimal data>

PM6680B/81/85

Power-on Status Clear

Enables/disables automatic power-on clearing. The status registers listed below are cleared when the power-on status clear flag is 1. Power-on does not affect the registers when the flag is 0.

–Service request enable register (*SRE)

–Event status enable register (*ESE)

–Operation status enable register (:STAT:OPER:ENAB)

–Questionable data/signal enable register (:STAT:QUES:ENAB)

–Device enable registers (:STAT:DREG0:ENAB)

–*RST does not affect this power-on status clear flag.

Parameters: <Decimal data> = a number that rounds to 0 turns off automatic power-on clearing. Any other value turns it on.

Returned Format: «1 0» ￿

1 is enabled and 0 is disabled.

Example: *PSC ￿ 1

This example enables automatic power-on clearing.

Complies to standards: IEEE 488.2 1987.

9-126 Command Reference