Fluke PM6685, PM6681R manual Standard Event Status Enable, Event Status Enable Register 1 = enable

PM6680B/81/85

*ESE

￿<Decimal data>

Standard Event Status Enable

Sets the enable bits of the standard event enable register. This enable register contains a mask value for the bits to be enabled in the standard event status regis- ter. A bit that is set true in the enable register enables the corresponding bit in the status register. An enabled bit will set the ESB (Event Status Bit) in the Status Byte Register if the enabled event occurs. See also status reporting on page 3-14.

Parameters: <dec.data> = the sum (between 0 and 255) of all bits that are true.

Event Status Enable Register (1 = enable)

Bit

7

6

5

4

3

2

1

0

Weight	Enables
128	PON, Power-on occurred
64	URQ, User Request
32	CME, Command Error
16	EXE, Execution Error
8	DDE, Device Dependent Error
4	QYE, Query Error
2	RQC, Request Control (not used)
1	Operation Complete

Returned Format: <Decimal data> ￿

Example:

SEND￿ *ESE ￿ 36

In this example, command error, bit 5, and query error, bit 2, will set the ESB-bit of the Status Byte if these errors occur.

Figure 9-3Bits in the standard event status register.

Complies to standards: IEEE 488.2 1987.

Command Reference 9-121