AMT Datasouth 4600 manual Basic Printer Features and Parameter Settings , PPLA/PPLB

Basic Printer Features and Parameter Settings , PPLA/PPLB.

NOTE: Features can vary based on printer model. Do not change settings

during printing or communication.

Feature	Parameter	Factory Default	Remarks
PRINT MODE	Thermal transfer /	Thermal transfer
	Direct thermal
AUTO	Mode 1~4	Mode 1	Calibrates on demand.
CALIBRATE
MODE
CUT/PEEL	-015 ~+.050	0	Controls cut and peel
OFFSET			position.
TPH VERTICAL	-.003~+.003”	0	Offset of vertical print
OFFSET			position.
RECOVER	ENABLED,	ENABLED	Contents reprint after media
PRINT	DISABLED		out or ribbon-out.
CUTER	YES	NO
INSTALLED	NO
PEELER	YES	NO
INSTALLED	NO
READER	YES	NO
INSTALLED	NO
WIN. CON. LIN.	0~254	0	Only under Windows with
			bundled printer driver and
			continuous media.
BASE SEED	0~4 ips	0 ips
COUNTING	UP	DOWN
DOWN	DOWN
MEDIA	GAP	GAP	Select for media
SENSOR TYPE	BLACK BAR		characteristics. Once
			changed make sure to
			calibrate before printing.
BACKFEED	ENABLED	DISABLED
	DISABLED
PRESENT	.0~040”	.87”	Appears only when
DISTANCE			BACKFEED enabled.
BASE	-028~+028	0
DARKNESS
BAUD RATE	600 / 1200 / 2400/	9600
(RS232)	4800 / 9600 /
	19200 /NONE
		13