AMT Datasouth 4600 manual Troubleshooting, LED and LCD Diagnosis, Media Problems

Troubleshooting

Normally, if the printer is in not working properly, the "READY" LED blinks continuously, and printing and communication between the host and printer stops.

LED and LCD Diagnosis

Blinking LEDs indicate a problem. Check the LEDs and the LCD display and refer to the following solutions:

Media Problems

LED/LCD			Indication
READY and MEDIA LEDs		Blinking
LCD Display		MEDIA OUT
Possible Problems	Solutions		Remarks
Mis-detected gap	Check the media path		For continuous media, check
	Check the position of the		application and driver, and
	label sensor		select continuous media.
Media out	Supply the media roll
Media not installed	Install the media roll
Media jam	Recover the jam

Note: If problem continues perform a label sensor calibration.

55