AMT Datasouth 4600 manual LED Indicators, Buttons, For the FM 4602 PLUS Series, and the

LED Indicators

There are three LED indicators on the front panel, READY, MEDIA and RIBBON. These indicators display the operation status of the printer.

READY	On – Normal operation
	Off – Printer error
MEDIA	On – Normal operation
	Blinking – Install new media
	Printhead overheat
	The printer is paused,
RIBBON	On – thermal transfer mode with ribbon installed
	Off – direct thermal mode ( no ribbon installed )
	Blinking – Install a new ribbon
	For the FM 4602 PLUS Series, and the
	FM 4603 PLUS Series models, modes of
	thermal transfer and direct transfer can be set
	via the printer panel or Utility software.

Buttons

There are three buttons, each with two basic functions.

Button		Function 1		Function 2
		(Press the button)		(Press the button and
				power switch together)
FEED/	∙	Feed a label	∙	Perform self test & print
CONFIG				configuration report
PAUSE/	∙	Pause printing	∙	Perform a media calibration
CALIBR	∙	Press again to resume printing
CANCEL/	∙	Interrupt and delete a print task	∙	Reset FLASH settings
RESET	∙	Force printer to continue after an
		error is solved.

9