AMT Datasouth 4600 Typical Set-up Control Panel Features features may differ among, Feature Item

Typical Set-up Control Panel Features (features may differ among

models)

Feature Item	Value	Factory Default
PRINT MODE	Direct Thermal or Thermal Mode	Direct Thermal
MAC ADDRESS	####-####-####	Printer Specific
DEFAULT GATEWAY	###.###.###.###	Printer Specific
SUBNET MASK	###.###.###.###	Printer Specific
IP ADDRESS	###.###.###.###	Client Determined
DHCP	Enabled or Disabled	Disabled
CLEAR FLASH	Yes or No	No
LENGTH (RS232)	7 Data Bits or 8 Data Bits	8 Data Bits
PARITY (RS232)	None Odd or Even	None
BAUD RATE	9600 / 115200 / 57600 / 38400 / 19200	9600
	9600 / 4800 / 2400 / 1200 / 600
TRIM DARKNESS	-030 ~ +030	+000
ABS DARKNESS	000~030	016
PRESENT DISTANCE	000~040	021
MEDIA SENSOR TYPE	Gap or Black Bar	Black Bar
COUNTING	Up or Down	Down
PEELER INSTALLED	Yes or No	No
CUTTER INSTALLED	Yes or No	No
RECOVER PRINT	Enabled or Disabled	Disabled
TPH VERT. OFFSET	-003 ~ +003	+000
CUT PEEL OFFSET	-015 ~ +050	+000
AUTO CALIBR MODE	Mode 1 ~ 4	Mode 1

Notes:

1.To verify that a feature has been properly changed cycle power on the printer.

2.Make sure the settings you desire has an * character by the value.

37