AMT Datasouth 4600 manual Ribbon Problems, Other Problems

Ribbon Problems

LED/LCD		Indication
READY and RIBBON LEDs		Blinking
LCD Display		RIBBON OUT
Possible Problems	Solutions		Remarks
Ribbon out	Supply the ribbon roll		Not applicable to direct
Ribbon jam	Recover the jam		thermal.
Ribbon sensor	Replace ribbon sensor
error

Note: If you use direct thermal, set with panel, Windows driver or command.

Other Problems

LED			Indication
READY LED			Blinking
Problems		Solutions		Remarks
Serial IO error	Check the baud rate,			Not for Centronics
	format or protocol
	between host and printer
Cutter failed	∙	Check the media.
	∙	Check the connection
		between cutter and
		main board.
	∙	Call for service.
Memory full	Check graphics and soft			Need to reboot the
	fonts from host. Delete by			system.
	application software for
	those no longer in use.

Note: After problem is solved, press CANCEL to continue printing

.

56