AMT Datasouth 4600 manual Printing a Configuration Report

Printing a Configuration Report

To perform a self-test and print a configuration report:

1.Turn off the printer.

2.Press and hold the FEED button while turning on the power.

3.When “SELF-TESTING …” is displayed on the LCD and the READY indicator blinks, release the FEED button.

NOTE: Printers with Ethernet will take 20 second for this process, the PAUSE button must be pressed during that period.

4.The printer prints out a configuration report.

5.When “READY” is displayed on the LCD , the READY indicator stops blinking but remains illuminated.

6.The following information is printed in the report:

∙Font list

∙Hardware configuration and status

∙Label parameters

∙Firmware version

Notes:

After the self-test the printer enters the diagnosis mode (Dump mode). To continue to normal operation, press CANCEL button to cancel the diagnosis mod (Dump mode).

42