AMT Datasouth 4600 manual Printer Pin 2- RxData ……… Pin 3- TxData ……… Pin 5- Ground ………, Parity

The simplest way to connect to other hosts (not PC compatible) or terminals is:

Printer

Pin 2- RxData ………

Pin 3- TxData ………

Pin 5- Ground ………

Terminal/Host

TxData

RxData

Ground

In general, as long as the data quantity is not too large and you use Xon/Xoff as flow control, it will be problem free.

Baud rate: 1200, 2400, 4800, 9600(default), 19200, 38400, 57600,115200 bauds. (Programmable by command)

Data format: always 8 data bits, 1 start bit and 1 stop bit.

Parity:	always non parity
Handshaking:	XON/XOFF as well as CTS/RTS (hardware flow control).

If you run an application with the bundled printer driver under

Windows and use the serial port, you should check the above parameters and set the flow control to "Xon/Xoff "or "hardware".

71