LevelOne FPS-2013TXU, FPS-2003TXU, FPS-2111TXU manual Print Server Mode - Bindery, Data, Buttons

Level One Printer Servers

Print Server Mode - Bindery

If Bindery Print Server Mode is selected, the following screen will appear:

	Figure 11: Bindery Print Server Mode
Data
Print Server Name	Change the name of the selected LevelOne Printer Server if you
	wish. (This field is also on the Configuration-Systemmenu.)
Master File Server	Name of the LevelOne Printer Server’s master file server
	(NetWare server). Select from the drop-down list.
Polling Queue	Defines how often the LevelOne Printer Server will poll the
Interval	queues to be serviced. The default is 1 second.
Job Notification	Set to Yes to receive a job notification at only the workstation
by	where the print job originated, No to receive a job notification at
Connection ID	all workstations that you have logged on.
Buttons
Quickset	This option will configure the NetWare server using default
	values. See below for details.
NetWare	Use this to configure the NetWare server. See below for details.
Configuration	See the following section for details
Help	View context-sensitive help.
Set to Default	Replace the on-screen values with the default values. These are
	NOT saved until you click Save to Device. (No changes are
	made to the NetWare server.)
Save to Device	Save any changes you have made to the LevelOne Printer
	Server
Cancel	Ignore any changes made since the last Save operation; close the
	window.

- 30 -