Level One Printer Servers
Printing - General
Problem No. 1 When using 10BaseT cabling, the LevelOne Printer Server unit does not work.
Solution No. 1 Check the Hub’s link LED for the port to which the LevelOne Printer Server is connected. If it is off, there is a problem in the network cable. If using 10BaseT or 100BaseT, check the LED next to the connector. It should be on if the network connection is OK.
Problem No. 2 |
| A printing device connected to the a LevelOne Printer Server |
|
| port cannot print or prints garbage. |
|
|
|
Solution No. 2 |
| Check the following: |
|
| • Cable connection between LevelOne Printer Server and printer. |
|
| • Printer driver in the application program or Windows matches |
|
| the printer. |
|
|
|
Problem No. 3 |
| The Configuration button on the Printer Status screen in |
|
| BiAdmin is grayed out, even though my printer in bi- |
|
| directional. |
|
|
|
Solution No. 3 |
| The button is unavailable if the printer is busy. You must wait until |
|
| the printer is idle. |
|
|
|
- 78 -