Motorola SBG900 Wireless STATUS Page Fields, Configuration Basic Gateway TCP/IP Wireless USB

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless USB

Wireless > STATUS Page

You can use this display-only page to:

•

•

View the wireless interface status

Help perform Troubleshooting for wireless network problems

Wireless > STATUS Page Fields

Regulatory Domain	Indicates the country the SBG900 is manufactured for. The list of channels depends on the
	country’s standards for operation of wireless devices. Depending on the domain set at the factory,
	USA FCC, Europe, Spain, France, Japan, or some other country name is displayed.
ESSID	Displays the ESSID set on the Wireless > NETWORK Page. For more information, see
	“Configuring the Wireless Network Name on the SBG900”. Never provide the ESSID to anyone
	who is not authorized to use your WLAN.
Channel	Displays the radio channel for the access point. If you encounter interference, you can set a
	different channel on the Wireless > NETWORK Page.
RTS Threshold	Displays the Request to Send Threshold set on the Wireless > NETWORK Page.
Frag Threshold	Displays the Fragmentation Threshold set on the Wireless > NETWORK Page.
MAC Address	Displays the SBG900 MAC address.
Security Mode	Displays the enabled wireless encryption type. For more information, see “Configuring WPA on
	the SBG900” or “Configuring WEP on the SBG900”.

MAC Access Control Displays the MAC Access Control setting (see “Configuring a MAC Access Control List on the SBG900”):

•Allow Listed — Only clients in the MAC access control list can access the WLAN.

•Allow Any Station Access — Any wireless client can access the WLAN.

MAC Access Control List Displays the MAC addresses of wireless clients having access (see “Configuring a MAC Access Control List on the SBG900”).

SBG900 User Guide 77