Motorola SBG900 manual Setting Up a USB Driver in Windows 98 Second Edition

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless USB

Setting Up a USB Driver

The following subsections describe setting up a USB driver if you connect a PC to the USB port on the SBG900. Before connecting a PC to the USB port, perform the appropriate procedure for your Windows version:

•

•

•

•

Setting Up a USB Driver in Windows 98 Second Edition

Setting Up a USB Driver in Windows 2000

Setting Up a USB Driver in Windows Me

Setting Up a USB Driver in Windows XP

The SBG900 USB driver does not support Macintosh or UNIX computers. For those systems, you can connect through Ethernet only.

Caution!

Be sure the SBG900 Installation CD-ROM is inserted in the CD-ROM drive before you plug in the USB cable.

If you have a problem setting up the USB driver, remove it by performing one of:

•

•

•

Removing the USB Driver from Windows 98 Second Edition or Windows Me

Removing the USB Driver from Windows 2000

Removing the USB Driver from Windows XP

Then perform “Running the Motorola USB Driver Removal Utility”.

Setting Up a USB Driver in Windows 98 Second Edition

1Insert the SBG900 Installation CD-ROM in the CD-ROM drive. This CD contains the USB drivers and must be inserted and read by the PC before you connect the SBG900 to the PC.

2Connect the USB cable as shown in USB Connection.

A few seconds after you complete the USB connection, the Add New Hardware Wizard window is displayed:

SBG900 User Guide 84