Motorola SBG900 manual Configuring the Wireless Clients, If You Performed

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless USB

Configuring the Wireless Clients

For each wireless client computer (station), install the wireless adapter — such as a Motorola WN825G, WPCI810G, or WU830G — following the instructions supplied with the adapter. Be sure to:

1Insert the CD-ROM for the adapter in the CD-ROM drive on the client.

2Install the device software from the CD.

3Insert the adapter in the PCMCIA or PCI slot or connect it to the USB port.

Step 1	Step 2
		Step 2
Step 3	Step 3
		Step 1

Configure the adapter to obtain an IP address automatically. The Motorola wireless adapters are supplied with a client configuration program called Wireless Client Manager, which is installed in the Windows Startup group.

On a PC with Wireless Client Manager installed, the icon is displayed on the Windows task bar. Double-click the icon to launch the utility.

You may need to do the following to use a wireless client computer to surf the Internet:

If You Performed	On Each Client, You Need to Perform
Configuring WPA on the SBG900	Configuring a Wireless Client for WPA
Configuring WEP on the SBG900	Configuring a Wireless Client for WEP
Configuring the Wireless Network Name on the SBG900	Configuring a Wireless Client with the Network Name
	(ESSID)
Configuring a MAC Access Control List on the SBG900	No configuration on client required

SBG900 User Guide 74