Motorola SBG900 manual Setting Up a USB Driver in Windows

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless USB

10Click Finish. The Systems Settings Change window is displayed:

11Click Yes to restart the computer.

When you finish setting up the USB driver, you can continue with “Configuring TCP/IP”.

If you have difficulties setting up the USB driver, perform “Removing the USB Driver from Windows 98 Second Edition or Windows Me” and repeat this procedure. If that does not correct the problem, see the Regulatory, Safety, Software License, and Warranty Information card provided with the SBG900 for information about obtaining warranty service.

Setting Up a USB Driver in Windows 2000

1Insert the SBG900 Installation CD-ROM in the CD-ROM drive. This CD contains the USB drivers and must be inserted and read by the PC before you connect the SBG900 to the PC.

2Connect the USB cable as shown in USB Connection.

A few seconds after you complete the USB connection, the Found New Hardware window is displayed:

SBG900 User Guide 88