Motorola SBG900 Gateway LAN - nat config Page, Gateway LAN - nat config page fields, Description

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration:

Basic Gateway TCP/IP Wireless USB

Gateway > LAN — nat config Page

Use this page to enable NAT and add clients to the CURRENT NAT PASSTHROUGH list:

Gateway > LAN — nat config page fields

Field or Button	Description
LAN
Enable NAT	If enabled, the single HFC IP Address (public IP address) assigned by the cable provider is
	mapped to many private IP addresses on the SBG900 LAN.
Apply	Click to apply your changes. You must reboot the SBG900.
NEW NAT	Specifies up to 32 computers as passthrough clients not subject to NAT, using their MAC
PASSTHROUGH	addresses. To enable this feature to work, your cable operator may need to provide you with
	additional public IP addresses.
MAC Address	Type the passthrough client MAC address. The format is 16 hexadecimal numerals.
Bypass Firewall	Select this box to set the NAT passthrough computer as a DMZ client. Use this setting with
(True DMZ)	extreme caution because a DMZ client is completely open to Internet hackers.
Add	Click to add the MAC address to the CURRENT NAT PASSTHROUGH list.
CURRENT NAT	Lists the computers on the LAN that are configured for NAT passthrough.
PASSTHROUGH
Delete	Click to delete the selected MAC address from the NAT passthrough list.

SBG900 User Guide 40