Motorola manual Configuring WPA on the SBG900

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless USB

Configuring WPA on the SBG900

To enable WPA and set the key on the SBG900:

1On the SBG900 Setup Program left panel, click Wireless.

2Click the SECURITY tab to display the Wireless > SECURITY — basic page:

3In the Security Mode field, select WPA and click Apply.

4Under WPA CONFIGURATION, choose one WPA Encryption type. Because performance may be slow with TKIP, we recommend choosing AES if your clients support AES:

TKIP	Temporal Key Integrity Protocol provides data encryption including a per-packet key mixing
	function, message integrity check (MIC), initialization vector (IV), and re-keying mechanism.
AES	The Advanced Encryption Standard algorithm implements symmetric key cryptography as a
	block cipher using 128-bit keys. We recommend this setting if all of your wireless clients
	support AES. The Motorola client adapters shown in “Optional Accessories” support AES.

SBG900 User Guide 66