Motorola SBG900 manual Gateway LAN - dhcp server config Page, Field, Description

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration:

Basic Gateway TCP/IP Wireless USB

Gateway > LAN — dhcp server config Page

Only experienced network administrators should use this page to perform advanced DHCP server configuration:

CAUTION!

Do not modify these settings unless you are an experienced network administrator with strong knowledge of IP addressing, subnetting, and DHCP.

Gateway > LAN — dhcp server config page fields

Field	Description
LAN IP Address	You can type the IP address of the SBG900 for your private LAN. The default is
	192.168.0.1.
LAN IP Subnet Mask	Displays the subnet mask in dotted-decimal format. The default is 255.255.255.0.
Starting IP Address	Enter the starting IP address to be assigned by the SBG900 DHCP server to clients in
	dotted-decimal format. The default is 192.168.0.2.
# of DHCP Users	Sets the number of clients for the SBG900 DHCP server to assign a private IP address.
	There are 253 possible client addresses. The default is 253.

DHCP Server Lease Time Sets the time in seconds that the SBG900 DHCP server leases an IP address to a client. The default is 3600 seconds (60 minutes).

Domain Name	Sets the domain name for the SBG900 LAN. The default is None.
Time To Live	Sets the TTL (hop limit) for outbound packets. The default is 64.
Interface Maximum	Sets the SBG900 LAN MTU in bytes. The minimum is 68 bytes. The default is 1500 bytes.
Transmission Unit
Apply	Click to apply your changes. You must reboot the SBG900.

SBG900 User Guide 41