Motorola SBG900 manual Gateway PORT TRIGGERS - predefined Page

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration:

Basic Gateway TCP/IP Wireless USB

Gateway > PORT TRIGGERS — predefined Page

When you run a PC application that accesses the Internet, it communicates with a computer on the Internet. In some applications, especially gaming, the computer on the Internet also communicates with your PC. Because NAT does not normally allow these incoming connections, the SBG900 supports port triggering.

The SBG900 is preconfigured with port triggering for common applications. You can also configure additional port triggers if needed. Configuring port triggers for an application requires:

•

•

The application transport protocol — TCP or UDP

The application port number

You can use the default values for the remaining parameters

Only one computer at a time connected to the SBG900 can use an application requiring port triggering. Use this page to view predefined port triggers.

SBG900 User Guide 46