LevelOne FPS-2013TXU manual Remote Printer Mode - Bindery, Data, Buttons, Bindery Remote Printer

Level One Printer Servers

Remote Printer Mode - Bindery

If, on the original screen, Remote Printer Mode - Bindery, was selected, the following screen will be shown.

	Figure 28: Bindery Remote Printer
Data
Device Name	Change the name of the selected LevelOne Printer Server if you
	wish. (This field is also on the Configuration-Systemmenu.)
File Server	Select the NetWare File Server to service each port.
Novell Printer	Select the NetWare print server to service the LevelOne Printer
Server for P1	Server's parallel port 1.
(Parallel port 1)
Novell Printer	Select the NetWare print server to service the LevelOne Printer
Server for P2, P3	Server's parallel port 2 (P2), parallel port 3 (P3).
Buttons
Set to Default	Replace the on-screen values with the default values. These are
	NOT saved until you click Save to Device. (No changes are made to
	the NetWare server.)
Save to Device	Save any changes you have made to the LevelOne Printer Server
Cancel	Ignore any changes made since the last Save operation; close the
	window.
Help	View context-sensitive help.

- 42 -