LevelOne FPS-2013TXU, FPS-2003TXU, FPS-2111TXU manual If your LevelOne Printer Server is not listed

Level One Printer Servers

Figure 35: Add Port (Peer-to-peer Print Driver)

If your LevelOne Printer Server is not listed:

•Select "List all Print Servers", and click the "Refresh" button.

•Check that both the LevelOne Printer Server and the printer are properly connected, and powered on.

•Make sure the LevelOne Printer Server has been configured.

•If using TCP/IP, try installing the NetBEUI protocol. Then uninstall and re- install the Peer-to-peer Print Driver.

6.Select the desired printer port, and then click the "Next" button. A pop-up message will inform you if the port has been created successfully.

If you see the following error message, you need to install

Internet Explorer 4 or later.

7.Then a screen like the following will be displayed:

- 66 -