Hitachi J300U Series Key Description, Key is pressed, the extension function mode can be selected

7.3Key Description

1

2

Data display	The key are used to select the code and change the data. When
Code display	the 1 key is pressed once, the monitor mode							is displayed
UP/DOWN key	first and then				,	, •••• are one by one. If the 1
				,
	key is pressed once again when					is displayed, the display is
	returned to		.
	If an optional code is selected when						is displayed and the
	FUNC	key is pressed, the extension function mode can be selected.

FUNC

[Function key] . . . This key allows the selection of commands and memorizes parameters.

When this key is pressed once in the state of , , the

data state is set. When the key is pressed once in the state of , the extension function code selection state is set.

FUNC

.

2

➤

2

.

➤	1
➤		FUNC

. ➤

➤ 1

➤

.

screen transition

FUNC

1	2
➤	➤

Select the extension function code.

screen transition

FUNC

➤

A setting method which is the smame as that for

to is

used for the subsequent screen transition.

RUN

[RUN key] . . . This key starts the run.

The set value of F4 determines a forward run or a reverse run.

STOP/RESET

[STOP/RESET key] . . . This key stops the run.

When a trip occurs, this key becomes the reset key.

7-2