Hitachi J300U Series instruction manual Copy Unit Function, 12-19

12.7Copy Unit Function

Operation example (Procedure to transfer the data of inverter A to B,C, and D inverters)

Se-	Operation	Key	Operation result
quence
	Set data is read out from the
1	inverter A (It is stored into the	READ
	memory.		Inverter A Copy unit

2Turn off the power supply to inverter A and remove the cable.

3Connect the cable to inverter B and turn on the power.

4	Copy data stored in the copy unit is	COPY	Data copy
	written to inverter B.
5	Cut off the power supply to inverter		Inverter B Inverter C Inverter D
	B. (* 1)
			Copy
	Perform the above processes from 3		unit
6	to 5 sequentially for inverters C and
	D. That is, the same process as at
	for inverter B.

Operation example (Process to change and transfer to inverters B, C and D)

	Connect the cable and press	MON FUN STR	Data change
1the remote key.
	Change the data of the inverter	1 2
with copy unit.		Copy unit	Inverter A
	Read out the data from	READ
inverter A (It is stored into the
2 to 6	memory area of the copy unit).
	The following procedures are the
	same those of the operation 1.	Inverter A	Copy unit

12-19