Hitachi J300U Series Commercial power source switching, Digitaloperator, Set TRM terminal mode

2. Commercial power source switching

Digitaloperator

Function code

Extension function code

Data set for commercial power source switching

		Set value	Run command to	Frequency command to
F	9
		03	Terminal	Terminal
C	3	Function name	Terminal rating plate	Set value
		Input terminal setting 3	3	14

Set the terminal mode.

Select the CS terminal.

operator (DOP)	unit (DRW)
Remote	or copy

NOTE: Allocate the commercial power source switching input terminal CS to one of the input terminal settings

1 to 8 (	C	0	to	C	7	). In this example, the terminal CS is allocated to the input terminal setting 3.
Monitor mode
				F-SET-SELECT TRM				Set TRM (terminal mode).
				F/R-SELECT			TRM
Function mode F-34				IN-TM3			CS	Select the CS terminal.

NOTE: Allocate the commercial power source switching input terminal CS to one of the input terminal settings 1 to 8 (IN-TM1 to IN-TM8). In this example, the terminal CS is allocated to the input terminal setting 3.

A-17