Hitachi J300U Series Select 1 V/f in the third hierarchy, Change the content of 6 Mode from

(3) New remote operator

First hierarchy

1 Command

2Initial

3Function

4Option

Second hierarchy		➤
1	Control
2	Acc/Dec
3	Run
4	Braking
Third hierarchy
		➤
1	V/f
2	Motor
3	Carrier
Fourth hierarchy
		➤
5	A-Dec		1:ON
		(0-1)
6	MODE		0:VC
		(0-5)
Third hierarchy
		➤
1	V/f
2 Motor
3	Carrier
Fourth hierarchy		➤
1 AUTO			0:NOR
		(0-2)

Select “3 Function” in the first hierarchy.

×2 SEL

Select “1 Control” in the second hierarchy.

SEL

Select “1 V/f” in the third hierarchy.

SEL

× 5	Change the content of “6 Mode” from
	0:VC to 4:SLV in the fourth hierarchy.

4When the data is changed, press the

key. STOR

STOR

RETN

Press the RETN key to return to the third hierarchy and select “2 Motor”.

SEL

Change the content of “0 NOR” from 0:NOR to 2:AUT in the fourth hierarchy.

1When the data is changed, press the STOR

2 DATA	2:AUT
	(0-2)

STOR

key.

When the monitor mode is selected, running by the autotuning data starts.

A-6