Hitachi J300U Series Operation of the Digital Operator, Power Lamp Monitor LED display, RUN key

7. OPERATION OF THE DIGITAL OPERATOR

The standard type digital operator is modified so as to be used easily by minimizing key opera- tions. Data can be set simply.

7.1 Names of Parts

POWER Lamp

Monitor (LED display)

This display shows frequency, motor current, motor revolution speed, and Trip history

Power lamp of control circuit

		FUNC.
FUNC (Function) key					Up key, Down key
This key is used for changing					These keys are used to
commands. When pressing		RUN	STOP/RESET		change data and increase
key after setting data and					or decrease the frequency.
parameter, they are automati-
cally memorized.				STOP/RESET key
	RUN key			This key is used for stopping the motor or
				resetting errors.
	This key is used for starting. (When			(When either operator or terminal is se-
	terminal run is selected, this key does			lected, this key works. If the extension
	not work.)			function is used, this function is void.)

WARNING

lThe STOP/RESET key works only when a function is set. Prepare an emergency switch separately. The use of the STOP/RESET key as an emergency switch may cause an injury.

7.2Operation Procedure

(Example that the frequency is set and the equipment starts running)

	➤	➤	➤	➤
Display after	Press the FUNC	Press the 1	Press the FUNC key once
power is turned
on	key once.	key five times.	and set the frequency by using
			the	1 and 2 keys.

.

.

(Frequency

monitor)

➤		➤			Start	➤
					run
Press the	FUNC	When selecting the monitor Press
							RUN
key once.		mode, press 1	and 2
		to display		.

➤

The frequency which is

set by the FUNC key is stored.

7-1