Fluke PM6681R, PM6685R manual Protected User Data, Recall

PM6680B/81/85

*PUD

￿<Arbitrary block program data>

Protected User Data

Protected user data. This is a data area in which the user may write any data up to 64 characters. The data can always be read, but you can only write data after un- protecting the data area. A typical use would be to hold calibration information, us- age time, inventory control numbers, etc.

The content at delivery is: #234 FACTORY CALIBRATED ON: 19YY-MM-DD

–YY = year, MM = month, DD = day

Returned format: <Arbitrary block response data>￿

–Where:

<arbitrary block program data> is the data last programmed with *PUD.

Example

Send ￿ :SYST:UNPR; *PUD ￿ #240Calibrated ￿ 1993-07-16, ￿ inven- tory ￿ No.1234

# means that <arbitrary block program data> will follow.

2 means that the two following digits will specify the length of the data block. 40 is the number of characters in this example.

Complies to standards: IEEE 488.2 1987.

PM6680B/81/85

*RCL

￿<Decimal data>

Recall

Recalls one of the up to 20 previously stored complete instrument settings from the internal nonvolatile memory of the instrument.

Memory number 0 contains the power-off settings for PM6685. For PM6681 mem- ory number 0 contains the power-off settings until PRESET is pressed. After pre- set, memory 0 contains the pre-preset settings.

Parameters:

<Decimal data> = a number between 0 and 19.

Example:

SEND￿ *RCL ￿ 10￿

Complies to standards: IEEE 488.2 1987.

Command Reference 9-127