Fluke PM6681R, PM6685R Error Code -200 to -221, Execution errors, Error Description, Number

		Error Messages
		Execution errors
Error	Error Description	description/explanation/examples
Number
–200	Execution error	This is the generic syntax error for devices that can-
		not detect more specific errors. This code indicates
		only that an Execution Error as defined in
		IEEE-488.2, 11.5.1.1.5 has occurred.
–210	Trigger error
–211	Trigger ignored	Indicates that a GET, ∗TRG, or triggering signal was
		received and recognized by the counter but was ig-
		nored because of counter timing considerations; for
		example, the counter was not ready to respond.
–212	Arm ignored	Indicates that an arming signal was received and
		recognized by the counter but was ignored.
–213	Init ignored	Indicates that a request for a measurement initiation
		was ignored because another measurement was al-
		ready in progress.
–214	Trigger deadlock	Indicates that the trigger source for the initiation of a
		measurement is set to GET and subsequent mea-
		surement query is received. The measurement can-
		not be started until a GET is received, but the GET
		would cause an INTERRUPTED error.
–215	Arm deadlock	Indicates that the arm source for the initiation of a
		measurement is set to GET and subsequent mea-
		surement query is received. The measurement can-
		not be started until a GET is received, but the GET
		would cause an INTERRUPTED error.
–220	Parameter error	Indicates that a program-data-element related error
		occurred. This error message is used when the
		counter cannot detect the more specific errors –221
		to –229.
–221	Settings conflict	Indicates that a legal program data element was
	Settings conflict;	parsed but could not be executed due to the current
	PUD memory is	counter state (see IEEE-488.2, 6.4.5.3 and
	protected	11.5.1.1.5.)
	Settings conflict; in-
	valid combination of
	channel and function

Error Code -200 to -221 8-7