Multibit ECC Errors Detected Error Messages
NOTE: The following error is specific to the PERC H710 controller only.
Error Message: Multibit ECC errors were detected on the RAID controller. If you continue, data corruption can occur. Contact technical support to resolve this issue. Press 'X' to continue or else power off the system, replace the controller and reboot.
Or
Error Message: Multibit ECC errors were detected on the RAID controller.The DIMM on the controller needs replacement. If you continue, data corruption can occur. Press 'X' to continue or else power off the system, replace the DIMM module, and reboot. If you have replaced the DIMM please press 'X' to continue.
CAUTION:
Probable Cause:
Corrective Action: Contact Dell Technical Support.
Configured Disks Removed or Not Accessible Error Message
Error Message: Some configured disks have been removed from your system or are no longer accessible. Check your cables and ensure all disks are present. Press any key or ’C’ to continue.
Probable Cause: The message indicates that some configured disks were removed. If the disks were not removed, they are no longer accessible. The SAS cables for your system might be improperly connected.
Corrective Action: Check the cable connections and fix any problems. Restart the system. If there are no cable problems, press any key or <C> to continue.
Troubleshooting
117