Converting Physical Disk to RAID Capable for PERC H310
NOTE: By default, all physical drives are discovered as
Conversion of a physical disk to RAID capable allows that disk to be used within a Virtual Disk or as a Hot Spare.
1Press <Ctrl><N> to access the PD Mgmt screen.
A list of physical disks is displayed. The status of the each disk is displayed under State.
2Press the
3Press <F2> to display the menu of available actions.
4Press the
5Press <Enter>.
Converting Physical Disk to Non-RAID for PERC H310
Conversion of a Physical Disk to
1Press <Ctrl><N> to access the PD Mgmt screen.
A list of physical disks is displayed. The status of the each disk is displayed under State.
2Press the
3Press <F2> to display the menu of available actions.
4Press the
5Press <Enter>
Initializing Virtual Disks
CAUTION: A Full Initialization permanently destroys any existing data on that virtual disk.
Perform the following steps to initialize virtual disks:
1On the VD Mgmt screen, select Virtual Disk # and press <F2> to display the menu of available actions.
2Select Initialization and press the
Management Applications for PERC Cards
61