| 10. Follow steps 4, 5, and 6 until all six intervals have been |
PROGRAMMING | programmed for pressure. |
(Continued) |
|
3-3. ERROR CODES
The above steps may be followed for interval alarms except you cannot program an interval alarm in the first interval.
Refer to Special Programming Modes on factory presets for load compensation, proportional control, and filter cycle counts.
The following defines the error code number. If an error code occurs, the buzzer will sound until you depress a cycle switch. The control will continue to display the error code and fryer will be inoperative until error is corrected.
•E 5 - Pot temperature too high. (Software high limit)
•PROB - Temperature probe has failed.
•E 41 - Control Problem - Must be initialized and reprogrammed.
The special programming modes are entered by way of a special sequence of keys and are intended to be infrequently used for service or factory preset functions. The modes are numbered according to the cycle that is selected to enter them.
•KFC Parameters (Factory Preset) (Cycle 6)
•Test Procedures (Cycle 7)
To enter special programming mode, the following steps must be followed exactly.
1.Enter the password keystroke sequence for programming mode. Refer to “The Basic Programming Sequence”.
2.Depress the EXIT COOL switch. Display will read “SP”.
304 |