Henny Penny FM07-020-F manual FILTERING THE SHORTENING Continued

2-6. FILTERING THE

SHORTENING (Continued)

7.When the pump is pumping air only, close the filter valve first and then move the main power switch to the OFF position.

8.Being sure there is sufficient shortening in the frypot, depress the EXIT FILL switch.

9.The unit will go into the stand-by mode and digital display will read COOL.

10.Temperature of shortening will then stabilize to 250ºF.

11.The control will stay in the stand-by mode until the EXIT COOL switch is depressed. This will return the control to the last cycle selected and regulate to that cycle’s programmed temperature.

304 2-5