Carrier Access Access Navigator user manual Cac

Electrical Installation

Prepare DSX-1 Cables

CAC	64-Pin Connector
Part Number

Shield drain wire	Do not ground second
with ground lug	shield drain wire. Use
	only to extend shield
	to extension cables.

DSX-1 cable is 10 ft (3m) long

Figure 6-3. DSX-1 Cable with Two Connectors (PN 005-0025)

2.If DSX-1 cables with flying wires are needed for wire-wrap or splice connections, cut off one connector and strip back the insulation (see Figure 6-4).

•Do not cut off connector with shield drain wire unless cable has shield drain wires at both ends. (Shield drain wire must be attached to Access Navigator.)

•Cut off one connector to produce cable of desired length.

•Strip back insulation to produce flying wires of desired length. (Leave some of inner bundle wrap exposed to identify wire bundle color codes.)

NOTE: ABAM shielded cable is recommended for extending DSX-1 connections.

	CAC		64-Pin Connector
Part Number						Shield drain wire
						with ground lug
							Color	Group 1, Blue Wrap
							wrap
		DSX-1 cable is 10 ft (3m) long							DS1 #1 to #12
									Group 2, Blue Wrap
									DS1 #13 to #25
					Color coded wires
									Group 3, Orange Wrap
									DS1 #26 to #32
				Figure 6-4. DSX-1 Cable with Flying Wires

6-10 August 2003 Access Navigator - Release 1.8