Carrier Access Access Navigator user manual Example set ds1 9 payload p2e15 test, P2e11

	CLI Language Reference
	CLI Command List
Field	Description
p2e11	Send 211–1 pattern with a maximum of 10 consecutive zeros and
	11 consecutive ones. (Minimum stress testing.)
p2e15	Send 215–1 pattern with a maximum of 14 consecutive zeros and
	15 consecutive ones. (Provides maximum number of consecutive
	zeros permissible in framed, non-B8ZS testing.)
p2e23	Send 223–1 pattern with a maximum of 22 consecutive zeros and
	23 consecutive ones. (Maximum stress testing.)
qrss	Send QRSS pattern (a modified 220–1) with a maximum of 14
	consecutive zeros and 20 consecutive ones. (Common stress test
	for T1 data applications.)

Example: set ds1 9 payload p2e15 test

For p2e, qrss, and all-ones test patterns, the CLI will provide a progress message indicating the success (ok) or failure of the command followed by the bit error test results, as in the following sample.

Message: Waiting for pattern sync........ok.
Testing line...		BE:0	CRC:0	BPV/LCV:0
08:15:47	FBE:0
08:15:48	FBE:0	BE:0	CRC:0	BPV/LCV:0
08:15:49	FBE:0	BE:0	CRC:0	BPV/LCV:0
08:15:50	FBE:0	BE:0	CRC:0	BPV/LCV:0
08:15:51	FBE:0	BE:0	CRC:0	BPV/LCV:0
08:15:52	FBE:0	BE:0	CRC:0	BPV/LCV:0
08:15:54	FBE:0	BE:0	CRC:0	BPV/LCV:0
08:15:55	FBE:0	BE:0	CRC:0	BPV/LCV:0
08:15:56	FBE:0	BE:0	CRC:0	BPV/LCV:0
08:15:57	FBE:0	BE:0	CRC:0	BPV/LCV:0
FBE:	Totals	Error Rates
	0	0.000000e+00
BE:	0	0.000000e+00
CRC:	0	0.000000e+00
LCV/BPV:	0	0.000000e+00

Signaling done.

The following error message will occur if an incorrect pattern is received:

Message: Waiting for pattern sync no sync.

The following error message will occur if there is no loopback in effect:

Message: *-Unable to send code;

*- far-end is not in loopback.

Access Navigator - Release 1.8 August 2003 18-79