Carrier Access Access Navigator Disconnect, Syntax delete user name, Syntax disconnect nch

CLI Language Reference

CLI Command List

Delete User

Purpose: This is a Level 1 command that allows a network manager to delete user names and deny access to the Access Navigator by login on through the Command Line Interface.

NOTE: Because there must be at least one Level 1 user, the CLI will send an error message if anyone attempts to delete all Level 1 users when there are still users defined at other levels.

Security: Level 1 (manager)

Syntax: delete user <"name">

Field

name

Description

User names can be up to 10 characters long, and may use any combination of letters and numbers. No spaces or special characters are allowed. Names are not case sensitive. Upper case (capital letters) will be converted to lower case letters before being processed. The name must be enclosed in quotes if it contains spaces..

You can display a list of all use names with the command Show Users on page 18-155.

Example: delete user "bill"

Disconnect

Purpose: Removes crossconnects created by the connect command. To change existing DS0 connections, you must first disconnect them before making new connections.

Security: Level 2 (operator)

Syntax: disconnect <n:ch>

Field	Description
n	DS1 number, 1 to 32.
ch	DS0 number, 1 to 24, or a range of numbers such as 5-8.

Example: disconnect 25:1-24

Access Navigator - Release 1.8 August 2003 18-33