Carrier Access Access Navigator user manual Printing the Help File, Syntax print help

CLI Language Reference

Printing the Help File

Printing the Help File

NOTE: To disable automatic pausing after each group of screen lines, use the set screen off command (see “Set Screen” on page 18-127). This will produce a continuous flow of help text that can be captured to the screen buffer or text file.

If desired, you can print the entire help file to the terminal screen by typing print help. This will produce a message similar to the following, which you can capture and save to disk or print out. If the terminal screen buffer is set up properly, you will be able to scroll up and down through the entire help file. This will allow you to find commands alphabetically, or search the file to find specific commands and words.

Syntax: print help

Message:

Command Line Interface Help. For immediate context help type ? at any time. For command sensitive help, type "help" before any partial command.

Note: Anything listed in brackets <> are variables set by the user.

Commands:	Activate Alarm Cut Off.
aco
add	Command Syntax: aco
	Create interfaces, attributes and users.
interface	Create a frame relay or other interface.
	Command Syntax:
	add interface <"name"> <ch-list> <type>
	name = the fractional group name.
	ch-list = ds1:ch-range
	ds1 = a ds1 number from 1 to 32
data	ch-range = list of DS0s in the DS1 (1-24)
	type = data
gr303	type = gr303
voice	type = voice
user	Create user w/ manager level access.
	Command Syntax: add user <"name">
alarms	name = user defined name.
	Displays the active alarms.
	Command Syntax:
	alarms <ds1 nequipment> <majorminoralert>
	Example: alarms ds1 1 major
alert	The example displays major alarms for DS1 #1.
	Display only Alert Alarms
ds1	Display active alarms for DS1, n=1-32
alert	Display only Alert Alarms for DS1
major	Display only Major Alarms for DS1
minor	Display only Minor Alarms for DS1
equipment	Display only active equipment alarms
alert	Display only Alert Equipment Alarms
major	Display only Major Equipment Alarms
minor	Display only Minor Equipment Alarms
major	Display only Major Alarms
minor	Display only Minor Alarms
clear	Clears specified information.
log	Clears the event log.
upload	Save database configuration to a file.
tftp	Save the database configuration
	via tftp to a file.

Access Navigator - Release 1.8 August 2003 18-13