Carrier Access Access Navigator user manual 10-24

Provision GR-303 Service

Provision “Drop” DS1 Circuits to Subscriber

NOTE: Remote Access Bank II provisioning requires “esf” framing and remote device management for “cafdl” protocol. See Provision Remote Access Bank II on page 11-1.

Remote Adit 600 provisioning requires remote device management protocol for "cafdl" or "caip" depending on management configuration. P-Phone service is enabled by "caip" with the "pphone" option. There can be only one management DS1 to a remote Adit 600, so all other DS1s to that Adit 600 must be set to point to the management DS1. See Provision Remote Adit 600 via FDL on page 12-1and Provision Remote Adit 600 via IP DS0 on page 13-1.

11.Set drop DS1 remote device management protocol to none, Carrier Access FDL, Carrier Access IP, or a DS1 with the following command:

set ds1 <n> remote device mgmt

<nonecafdlcaip <ipaddress>ds1 n> [pphone]

Example:	set ds1 9 remote device mgmt none
Example:	set ds1 9 remote device mgmt cafdl
Example:	set ds1 9 remote device mgmt caip 192.168.201.1
Example:	set ds1	9 remote device mgmt caip 192.168.201.1 pphone
Example:	set ds1	9 remote device mgmt ds1 10

10-24 August 2003 Access Navigator - Release 1.8