Carrier Access Access Navigator user manual Read Remote Loopback, Read Remote RS232

CLI Language Reference

CLI Command List

Description:

Item	Description
1) 2) 3) ...	Event number, starting with the most recent.
Time	Time of the event.
Date	Date of the event.
Description	Message describing the event.

Read Remote Loopback

Purpose: Reads and displays the loopback status of the remote terminal on the specified DS1.

NOTE: All read remote commands require that the remote Access Bank II is operational and connected to an Access Navigator drop DS1 using Carrier Access FDL management protocol.

Security: Level 3 (monitor)

Syntax: read remote <n> loopback

Field

n

Description

DS1 number, 1 to 32

Example: read remote 9 loopback

Message: Remote Port T1 in Equipment Payload loopup.

Read Remote RS232

Purpose: Reads and displays the asynchronous RS-232 data port status and settings from the remote Access Bank II at the far end of the Access Navigator’s DS1. The first five items are status and the last four are settings. The Access Bank II must be operational to read its settings. The command displays a message similar to the following.

Security: Level 3 (monitor)

Syntax: read remote <n> rs232

Field

n

Description

DS1 number, 1 to 32.

Example: read remote 9 rs232

Access Navigator - Release 1.8 August 2003 18-51