Carrier Access Access Navigator user manual Add User, Set User Access Level

CLI Language Reference

Managing Users

Description:

Item	Description
User	User names of people with access to the system.
Level	User access level: manager (1), operator (2), monitor (3).
Logged in	Number of active management sessions, 0 to 3.
Last Login	Time and date that user last logged into the system.

Add User

User names can be up to 10 characters long, and may use any combination of letters and numbers. No spaces or special characters are allowed. Names are not case sensitive. Upper case (capital letters) will be converted to lower case letters before being processed. The name must be enclosed in quotes if it contains spaces..

Add a new user with the following command.

Syntax: add user <"name">

Example: add user "alice"

Set User Access Level

NOTE: There must be at least one Level 1 user.

All users have Level 1 access (highest) unless changed to a lower access level.

User	Level	Access
Manager	1	Access to all commands. Can add and delete users.
		There must be at least one Level 1 user.
Operator	2	Access to all commands except adding and deleting
		users. Can change own password.
Monitor	3	Access limited to displaying reports and status. No
		access to any commands that could affect system
		operation.

Set user access levels with the following command.

Syntax: set user <"name"> level <access>

Example: set user "alice" level 2

18-16 August 2003 Access Navigator - Release 1.8