Carrier Access Access Navigator user manual Set DS1 Threshold, Syntax set ds1 n termid id

CLI Language Reference

CLI Command List

Syntax: set ds1 <n> termid <id>

Field

n

id

Description

DS1 number, 1 to 32.

Termination ID, 1 to 28. IDs used by the GR-303 switch must all be different.

Example: set ds1 5 termid 2

Set DS1 Threshold

Purpose: Sets the threshold levels for performance monitoring. This command lets the user to set the threshold and measurement interval for each error type. (Status DS1 Performance on page 18-162for descriptions of error types.)

NOTE: To disable threshold checking for a DS1 or error type, set its threshold value to zero.

Security: Level 2 (operator)

Syntax: set ds1 <n> threshold <interval> <errortype> <value>

Example: set ds1 9 threshold day uas 1000

Example: set ds1 5-8 threshold hour cv 120

Field	Description
n	DS1 number, 1 to 32, or range of numbers such as 5-8.
interval	Measurement time period: <dayhourmin15>
	day – 1 day
	hour – 1 hour
	min15 – 15 minutes
errortype	Error type: <cvessessefsdmuas>
	cv – Line Code Violations
	es – Errored Seconds
	ses – Severely Errored Seconds
	sefs – Severely Errored Frame Seconds
	dm – Degraded Minutes
	uas – Unavailable Seconds
value	Maximum number of errors allowed during measurement
	interval. Exceeding this value will log a threshold crossing event.

Access Navigator - Release 1.8 August 2003 18-115