Carrier Access Access Navigator user manual Send Remote V35 TSI Equipment Loopup

Diagnostics & Troubleshooting

Send Remote V35 TSI Equipment Loopup

Send Remote V35 TSI Equipment Loopup

This command makes the remote Access Bank II perform an equipment loopback on the V.35 signal. This takes the received DS0s from the V.35 equipment interface, loops them in the Time Slot Interchange (TSI), and sends them back to the V.35 output. See Figure 15-21.

Syntax: send remote <n> v35 tsi equipment loopup

								V.35
CA FDL							TSI Equipment Loopup
Command
				Access Bank II
Access
	DS1	T1	Framer			Time Slot			Interface
Navigator
					Interchange

Figure 15-21. Remote V.35 TSI Equipment Loopup

Send Remote V35 TSI Network Loopup

V.35

This command makes the remote Access Bank II perform a network loopback on the V.35 data. This takes the received V.35 DS0s from the DS1, loops them in the Time Slot Interchange (TSI), and sends them back to the DS1 output. See Figure 15-22.

Syntax: send remote <n> v35 tsi network loopup

								V.35
CA FDL							TSI Network Loopup
Command
				Access Bank II
Access						Time Slot			Interface
	DS1	T1	Framer
Navigator
					Interchange

V.35

Figure 15-22. Remote V.35 TSI Network Loopup

15-42 August 2003 Access Navigator - Release 1.8