Setup and Installation

Note: The Belkin Heavy-Duty Fixed Shelf (part number RK5021) can be purchased online at www.belkin.com or by calling Belkin at 800-223-5546.

Caution: Proper ventilation required. The AVU1500 produces heat. Allow at least a one-inch space on all sides to ensure proper ventilation. Do not block the exhaust fan on the rear of the unit.

To install your AVU1500 in a 19-inch equipment rack, install the Belkin Heavy-Duty Fixed Shelf. (See the installation instructions included in the box with the shelf.)

If mounting the AVU1500 on an equipment shelf, follow these installation steps:

a. Make sure that the AVU1500 is off and unplugged.

b. Remove the battery module from the AVU1500 (see the section “Care and Maintenance - Hot-Swappable Battery Module” on page 45. This will make the unit significantly lighter while installing the AVU1500 in the rack.

c. Remove all four feet on the bottom of the AVU1500 with a screwdriver (optional).

d. Align the front rack-mount brackets with the front of the AVU1500 for flush installation in the rack.

e.Attach the bracket to one side of the AVU1500 with the screws provided (see diagram below). You must use a minimum of four screws to mount each bracket.

Belkin PureAV Hybrid AVU1500 UPS

®28

Page 31
Image 31
Belkin AP51300fc10-BLK, AVU1500 user manual Setup and Installation