Setup and Installation
•Preamp: If you wish to use your preamp as a remote trigger (for more info, read “Easy Power On and Off” on page 4, then...
•The filter bank to which you connect your preamp must be set to “always on”.
•In the event of a power outage, your AVU1500 will begin to systematically shut down power outlets. So, don’t forget when your preamp is shut down, it will trigger a power cut to all the switched outlets.
•Any device you wish to use as your remote device (e.g., preamp) must be equipped with a switched AC power outlet or with a 3~30V DC output
•Projectors and Projection TVs: Assign these devices to filter banks set to “always on”.
•When most projectors and projection TVs are turned off, they still receive power and use this power to drive a fan that helps cool critical internal parts. For this reason, we recommend connecting these types of devices to outlets with filter banks set to “Always on”. Connecting them to a “switched” outlet means the devices will not only be turned off, but their power will get cut off and the fans will not be able to properly cool the equipment.
•In the event of a power outage, your AVU1500 will begin its SmartStage shutdown procedure (unless you have override turned on). If the power outage lasts longer than the AVU1500’s battery backup, then all of the devices will eventually lose power. To prepare for this, it is best to have your projector or projection TV turned off first so that the internal fans can properly cool internal parts before the devices lose power all together. Your AVU1500 can help you do this: Simply have the AVU1500’s IR Blaster send an “off” signal to your projector/TV at the beginning of Stage 1 shutdown (this will be described in more detail at Step 5, Program). Then, your projector/TV can cool until the stage to which it is connected loses power. If you want to give your projector/projection TV the most amount of time possible to cool, then assign it to a Stage 3 power outlet; otherwise, a Stage 2 outlet may be fine.
Belkin PureAV Hybrid AVU1500 UPS
®26
