Belkin PureAV Hybrid AVU1500 UPS
Troubleshooting
Wiring Fault
The
Possible causes:
•Your wall outlet may have the hot and neutral
•Check to ensure your AVU1500 is plugged into a
•If the “Wiring”
Remote Trigger
When I turn on my remote trigger device (e.g., preamp), nothing happens.
Possible causes:
•Your remote trigger device should be plugged into an AVU1500 power outlet set to “Always On”.
•The remote trigger feature should be turned on. The
•Your remote trigger device should be plugged into one of the two available “Remote IN” connectors: DC In or AC In.
When I turn off my remote trigger device (e.g., preamp), my other switched devices do not turn off.
Possible causes:
•The remote trigger feature should be set to “ON”. The
•Your remote trigger device should be plugged into one of the two available “Remote IN” connectors: DC In or AC In.
•If you have one device plugged into the “Remote IN – DC In” connector, and another device plugged into the “Remote IN – AC In” connector, then you have two remote triggers. In this case, both remote trigger devices must be turned off in order to cut power to all the switched outlets.
Switched Button
Pressing the front-panel “Switched” button does nothing.
Possible causes:
•If the
•If you do not want to use the remote trigger feature, then move the
47
