Belkin AVU1500, AP51300fc10-BLK user manual Prepare, Charge the Battery

Belkin PureAV Hybrid AVU1500 UPS

Setup and Installation

Step 1 – Prepare

Before you do anything with your new AVU1500, take a few minutes to...

a.Read the safety precautions (pages 3-4);

b.Unpack all the product materials and ensure all the expected package contents are included (page 21); and

c.Study the unit’s front and rear panels to become familiar with all the different elements (review the front- and rear-panel features

on pages 8-20.

Step 2 – Charge the Battery

Like most consumer products containing rechargeable batteries, your AVU1500 also requires its battery to be fully charged before you begin using the product. This could take up to 12 hours (possibly less). We realize that you’re anxious to begin using your AVU1500 right away, but the good news is that while your unit is charging, there are plenty of necessary and valuable things for you to be doing.

a.To charge the unit’s battery, plug your AVU1500 into a grounded (3-pin) 120V AC wall outlet. The battery will charge automatically even when the AVU1500 is powered off. To check on its progress, turn the AVU1500 on and look at the battery-charge meter on the front display:

The battery is fully charged when all five bars are solid.

Blinking or animated bars indicate the unit is still recharging the battery.

b.While the unit is charging the backup battery, we recommend you take advantage of the time to perform all of the setup Steps 1 through 5. Please perform “Step 6 – Connect Cables” and “Step 7 – Test Your Setup” only after your AVU1500’s battery is fully charged.

23