Belkin AP51300fc10-BLK, AVU1500 user manual Plan, Equipment Type

Setup and Installation

Step 3 – Plan

There are several decisions to make to ensure everything is connected and operating properly. When connecting your home theater equipment’s power cords to your AVU1500’s power outlets, consider, for example, the following questions:

•Which devices should always receive power (i.e., “always on”) versus having power cut on and off (i.e., “switched”)?

•In the event of a power outage, which devices are less critical and can lose power first, and which devices are most critical and should be powered for as long as possible? These answers will determine which devices should be plugged into shutdown Stage 1, 2, and 3 outlets.

•Should another device (e.g., preamp) act as a remote trigger and cause other connected devices (e.g., amp, subwoofer) to power on and off?

These decisions are inter-related and you should consider these same questions for each device you plan to power through your AVU1500. The planning tables below can assist greatly; these same tables are provided on the last page of this User Manual (see “Appendix: Setup Worksheets”) for you to detach and use more easily. A completed table will help you greatly not only during the setup of your system, but also in testing your system setup.

Equipment Type:

Use the table below to list every component you plan to have powered by your AVU1500. Feel free to write over the few items we’ve listed as possibilities.

Digital equipment	Analog equipment	High-current
		equipment
TV	Tuner/receiver	Amplifier
DVD player	Tape player	Subwoofer
CD player	Phonograph
DVR (e.g., TiVo®)	VCR
Cable box
Satellite box
Game consoles (e.g., Xbox®)
Home PC/Media Center PC

Belkin PureAV Hybrid AVU1500 UPS

®24